• Home
  • Blog
  • Single Guitar Vintage crackle

Single Guitar Vintage crackle

Single Guitar Vintage crackle

Made out of 100% water buffalo leather with a retro antique finish. Additionally, this bag is equipped with good looking, high quality brass fittings, also in the vintage look.

 

  • The strong No.10 Nylon zipper completely opens up the bag. In this way you can lay your instrument in your bag without a problem. By closing the bag your bass is held inside like a sandwich. No matter what size of bass you have – no more moving or shifting!
  • Underneath the zipper (belly) is a foam flap positioned to protect the instrument from scratches. For extra protection, there are two perfectly positioned inner case patches.
  • At the top you will find a small pocket for your guitar tuner and other small accessories.
  • At the bottom is a large pocket for reading material and an extra compartment for replacement parts.
  • Inside is a small see-through pocket specially for your name card or picks.
  • The bag’s handle- and shoulder-straps are both attached with not just one but two steel-fasteners; doubled up for a more comfortable wear and a better hold!
  • Underneth the shoulder pads is a non slippery rubber to hold the bag on your shoulder.
  • For added support, we have sewn in an extra protective layer in the bottom of the bag.
  • This bag has two well balanced shoulder straps.

    Definitely a handcrafted masterpiece!

 

 

Categories: ,

Description

Inner structure

The bag is composed of a 5-layer sandwich construction.

  1. layer: outer, 100% full textured calfskin.
  2. layer: 3 mm of soft thick foam, provides a shock absorber affect.
  3. layer: 2 mm of thick hardened plastic floor plate, which acts to support the bag and protect the instrument.
  4. layer: 20 mm inner padding of foam, which huddles against the bass body and builds a protective shell for the instrument.
  5. layer: antistatic hardwearing polyamide and two specially positioned leather patches protecting the bridge, strings and instrument hardware.

TECHNICAL INFORMATION:

The bag is composed of a 5-layer sandwich contruction.

  1. layer: outer, 100% water buffalo leather.
  2. layer: 3 mm of soft thick foam, that provides a shock absorbing effect.
  3. layer: 2 mm of thick hardened plastic floor plate, which supports for the bag and protects the instrument.
  4. layer: 20 mm of inner padding of foam, which huddles against the bass body and builds a protective shell for the instrument.
  5. layer: antistatic hardwearing polyamide and two specially positioned leather patches protecting the bridge, strings and instrument hardware.