Browne Amplification, Alkene

Description

CLIPPING & TONE OPTIONS

ALKENE expands on the original circuit with two internal switches and one external clipping switch, giving you meaningful tonal options without overcomplicating things.

1. ASYMMETRICAL CLIPPING (External Switch)
This external switch toggles between traditional symmetrical soft clipping and asymmetrical soft clipping.
Right = Stock Symmetrical Clipping
Left = Asymmetrical Clipping
Asymmetrical clipping allows the Green side to open up and bloom in a new way, delivering more punch, a wider feel, and slightly less compression—perfect for players who want a more amp-like response.

2. MORE CLIP (Internal – Top)
The More Clip switch engages an alternate set of hard clipping diodes, adding extra bite, aggression, and gain.
Right = MORE CLIP
Left = Stock Setting
This mode slightly reduces output volume, so you’ll want to push the Level control higher. When using More Clip, we highly recommend pairing it with Asymmetrical Clipping as a starting point.

3. LOW CUT (Internal – Bottom)
The Low Cut (bass cut) switch lets you roll off just the right amount of low end to better fit your rig.
Right = Stock Setting
Left = Low Cut Enabled
If your setup already has plenty of low end, this switch tightens things up beautifully without thinning your tone.
Accessing the Internal Switches

To access the internal switches, remove the four Phillips-head screws securing the backplate. Inside, you’ll find a small DIP switch with two positions. Using a small flathead screwdriver, carefully set each switch to your preferred configuration.